24-Hour Service Hotline:
Products
Application characteristics It is used for short cutting materials such as gray cast iron, ductile iron, aluminum alloy, copper alloy, etc. For long cutting materials, internal cooling must be used for forced chip removal; strong centering ability, stable dimensional accuracy and good surface quality; suitable for high-speed large Feed cutting.
Unit: mm
Size series | Order No. | Size feature | Thread bottom hole | ||||||
dc | Outer cooling | Inner cooling | Ic | Lf | ds | Is | lo | Cutting tap | Thread forming tap |
4 | DH7000-K/N-70400 | DH7001-K/N-70400 | 36 | 42 | 4 | 36 | 83 | ||
4.5 | DH7000-K/N-70450 | DH7001-K/N-70450 | 42 | 50 | 5 | 36 | 90 | M5×0.5 | |
5 | DH7000-K/N-70500 | DH7001-K/N-70500 | 42 | 50 | 5 | 36 | 90 | M6×1 | |
5.5 | DH7000-K/N-70550 | DH7001-K/N-70550 | 49 | 57 | 6 | 36 | 97 | ||
6 | DH7000-K/N-70600 | DH7001-K/N-70600 | 49 | 57 | 6 | 36 | 97 | ||
6.5 | DH7000-K/N-70650 | DH7001-K/N-70650 | 56 | 66 | 7 | 36 | 106 | ||
7 | DH7000-K/N-70700 | DH7001-K/N-70700 | 56 | 66 | 7 | 36 | 106 | M8×1 | |
7.5 | DH7000-K/N-70750 | DH7001-K/N-70750 | 65 | 76 | 8 | 36 | 116 | ||
8 | DH7000-K/N-70800 | DH7001-K/N-70800 | 65 | 76 | 8 | 36 | 116 | ||
8.5 | DH7000-K/N-70850 | DH7001-K/N-70850 | 73 | 87 | 9 | 40 | 131 | M10×1.5 | |
9 | DH7000-K/N-70900 | DH7001-K/N-70900 | 73 | 87 | 9 | 40 | 131 | M10×1 | |
9.5 | DH7000-K/N-70950 | DH7001-K/N-70950 | 81 | 98 | 10 | 40 | 140 | ||
10 | DH7000-K/N-71000 | DH7001-K/N-71000 | 81 | 98 | 1 0 | 40 | 140 | ||
10.5 | DH7000-K/N-71050 | DH7001-K/N-71050 | 86 | 98 | 11 | 45 | 145 | ||
11 | DH7000-K/N-71100 | DH7001-K/N-71100 | 86 | 98 | 11 | 45 | 145 | M12×1 | |
11.5 | DH7000-K/N-71150 | DH7001-K/N-71150 | 93 | 98 | 12 | 45 | 145 | ||
12 | DH7000-K/N-71200 | DH7001-K/N-71200 | 93 | 98 | 12 | 45 | 145 | M14×2 | |
12.5 | DH7000-K/N-71250 | DH7001-K/N-71250 | 99 | 114 | 13 | 45 | 161 | M14×1.5 | |
13 | DH7000-K/N-71300 | DH7001-K/N-71300 | 99 | 114 | 13 | 45 | 161 | M14×1 | |
13.5 | DH7000-K/N-71350 | DH7001-K/N-71350 | 106 | 114 | 14 | 45 | 161 | ||
14 | DH7000-K/N-71400 | DH7001-K/N-71400 | 106 | 114 | 14 | 45 | 161 | M16×2 |
Note: 1.Order instance DH7001-K/N-70610(10 pcs)
2.Non-standard customization is accepted
(1)Non-standard customization for cutter diameter, slot length and total length
(2)Customization for handle form as per DIN6535HA/ HB/ HE
(3)Optional coating TiN, TiAIN, Helica
(4)Order instance DH7001-K/N-70612 TiAIN/ HE(5 pcs)
Page Copyright Fulaike (Suzhou) Cutting Tools Co., Ltd Website : www.300.cn 苏ICP备11074182号